Epson WorkForce AL-MX200DNF

CR-XX
The CR and LF commands are added.
CR=CR-LF, LF=CR-LF, FF=CR-FF
*
Factory default menu setting
PS Settings
Use the PS Settings menu to change printer settings that only affect jobs using the PostScript Level3
Compatible printer language.
PS Error Report
Purpose:
To specify whether to print the description of errors concerning the PostScript Level3 Compatible
printer language.
Values:
Off
Dose not print the PS error report.
On
*
Prints the PS error report.
*
Factory default menu setting
PS Job Time-Out
Purpose:
To specify the runtime of a single job using the PostScript Level3 Compatible printer language.
Values:
Off
*
Does not set the runtime of a PS job.
On 1min
Sets the runtime of a PS job.
1min - 900min
*
Factory default menu setting
PDF Settings
Use the PDF Settings menu to change printer settings that only affect the PDF jobs.
AL-MX200 Series User’s Guide
Using the Operator Panel Menus and Keypad 273