Epson WorkForce AL-MX200DNF

2. To connect a telephone and/or answering machine to your printer, plug the telephone or
answering machine line cord into the phone connector (
).
1 Phone connector
2 To an external telephone or an answering machine
Configuring Fax Initial Settings
Setting Your Region
You need to set the region where your printer is used for using the fax service on the printer.
1. Press the System button.
2. Select Admin Menu, and then press the button.
3. Select Fax Settings, and then press the
button.
4. Select Region, and then press the
button.
5. Select the locale of the printer, and then press the
button.
6. When the LCD panel shows Restart System, select Yes, and then press the
button.
The printer restarts to apply the setting.
AL-MX200 Series User’s Guide
Faxing 222