Epson WorkForce AL-MX200DNF

Item Printing Options
Summary
Printing Custom Size Paper
This section explains how to print on custom size paper using the print driver.
The way to load custom size paper is the same as the one to load standard size paper.
❏ “Loading Print Media in the Paper Tray” on page 123
❏ “Loading Print Media in the Priority Sheet Inserter (PSI)” on page 132
❏ “Setting Paper Sizes and Types” on page 138
Defining a Custom Paper Size
Before printing, define a custom size on the print driver.
Note:
When defining a paper size on the print driver or the operator panel, be sure to specify the same size as the
actual print media used. Specifying a wrong size for printing can cause a printer failure. This is especially
true if you specify a bigger size when using a narrow width paper.
Using the Windows Print Driver
On the Windows print driver, define a custom size in the Custom Paper Size dialog box. This section
explains the procedure using Windows 7 as an example.
On Windows XP or later, only users with administrator rights can use the administrator's password to
change the settings. Users without the rights of administrator can only view the contents.
1. Click Start — Devices and Printers.
2. Right-click the icon for your printer, and then select Printer properties.
3. Select the Configuration tab.
4. Click Custom Paper Size.
5. Select the custom setup you want to define from Details.
AL-MX200 Series User’s Guide
Printing Basics 153