Epson WorkForce AL-MX200DNF

Values:
Secure Receive Set
Disable
*1
Does not require a password to print incoming faxes.
Enable
Requires a password to print incoming faxes.
Change
Password
*2
0000
*1
-9999
Sets or changes the password required to print incoming faxes.
*1
Factory default menu setting
*2
Not displayed when Secure Receive Set is set to Disable.
Software Download
Purpose:
To install or discard the software data downloaded and sent by the connected computer.
Values:
Disable
Discards the downloaded software data to maximize data security.
Enable
*
Installs the downloaded software data.
*
Factory default menu setting
Scan to E-Mail
Use the Scan to E-Mail menu to edit the transmission source.
Edit From Field
Purpose:
To enable or disable editing of the transmission source.
Values:
Disable
Disables editing of the transmission source.
Enable
*
Enables editing of the transmission source.
*
Factory default menu setting
USB Settings
Use the USB Settings menu to change printer settings affecting a USB port.
AL-MX200 Series User’s Guide
Using the Operator Panel Menus and Keypad 304