5. If necessary, customize other copy options including the number of copies, copy size, and image
quality.
See Also:
“Customizing Copy Options” on page 166
6. Press the
(Start) button to begin copying.
Margin Middle
You can specify the middle margin of the copy.
1. Load a document(s) face up on the Automatic Document Feeder (ADF) with the top edge going in
first; or place a single document face down on the document glass and close the document cover.
See Also:
❏ “Making Copies From the Automatic Document Feeder (ADF)” on page 165
❏ “Making Copies From the Document Glass” on page 163
2. Press the
(Copy) button.
3. Select Margin Middle, and then press the
button.
4. Press the
or button or enter the desired value using the numeric keypad, and then press the
button.
0mm
*
/0.0inch
*
Specify the value in increments of 1 mm/0.1 inch. Which factory default
menu setting displays depends on the value selected for mm / inch under
the System Settings menu. See “mm / inch” on page 296 for more
information.
0 - 50mm/0.0 - 2.0inch
*
Factory default menu setting
5. If necessary, customize other copy options including the number of copies, copy size, and image
quality.
See Also:
“Customizing Copy Options” on page 166
6. Press the
(Start) button to begin copying.
AL-MX200 Series User’s Guide
Copying 180
To Next Page
Loading...
