Epson WorkForce AL-MX200DNF

Making Copies From the Document Glass
Note:
❏ A computer connection is not required for copying.
❏ Ensure that no document is on the Automatic Document Feeder (ADF). If any document is detected
on the ADF, it takes priority over the document on the document glass.
❏ Contaminants on the document glass may cause black spots on the copy printout. For best results,
clean the document glass before use. For more information, see “Cleaning the Scanner” on
page 380.
To make a copy from the document glass:
1. Open the document cover.
2. Place a single document face down on the document glass and align it with the registration guide
on the top left corner of the document glass.
AL-MX200 Series User’s Guide
Copying 163