Epson WorkForce AL-MX200DNF

The printer restarts automatically with the factory default menu settings.
Changing the Language
To display a different language on the operator panel:
Using the Operator Panel
1. Press the System button.
2. Select Panel Language, and then press the
button.
3. Select the desired language, and then press the
button.
Using the Printer Setting Utility
The following procedure uses Microsoft
®
Windows
®
7 as an example.
1. Click Start — All Programs — EPSON — your printer — Printer Setting Utility.
Note:
The window to select a printer appears in this step, when multiple print drivers are installed on your
computer. In this case, click the name of the desired printer listed in Printer Name.
The Printer Setting Utility appears.
2. Click the Printer Maintenance tab.
3. Select System Settings from the list at the left side of the page.
The System Settings page is displayed.
4. Select the desired language from Panel Language, and then click the Apply New Settings
button.
AL-MX200 Series User’s Guide
Using the Operator Panel Menus and Keypad 326