3. Select Phone Book, and then press the button.
4. Select Group Dial, and then press the
button.
5. Select the group dial number that you want to edit, and then press the
button.
6. To change the group dial name:
a Select Name, and then press the
button.
b Enter a new name, and then press the
button.
c Select Apply Settings, and then press the
button.
d Select Yes when Are You Sure? is displayed, and then press the
button.
7. To change the speed dial number:
a Select Speed Dial No, and then press the
button.
b Select or deselect a desired speed dial number(s), and then press the
button.
c Select Apply Settings, and then press the
button.
d Select Yes when Are You Sure? is displayed, and then press the
button.
Note:
Deselecting all speed dial numbers in the group dial number does not delete the group dial number
itself. To delete the group dial number, press the C (Clear) button step b above and proceed to step
d.
8. If you want to edit another group dial number, repeat steps 5 to 8.
9. To quit editing group dial numbers, keep pressing the
(Back) button until the LCD panel
shows Select Function.
Creating and Editing a Fax Group Using a Computer
You can also create and edit a fax group with EpsonNet Config or Address Book Editor.
AL-MX200 Series User’s Guide
Faxing 249
To Next Page
Loading...
