Epson WorkForce AL-MX200DNF

Automatic Dialing
Speed Dialing
You can store up to 99 frequently dialed numbers in fax speed dial locations (01– 99).
When a delayed fax job or a redial job for a speed dial number exists, you cannot change the speed dial
number using the operator panel or EpsonNet Config.
Storing a Fax Number for Speed Dialing Using the Operator Panel
1. Press the System button.
2. Select Admin Menu, and then press the
button.
3. Select Phone Book, and then press the
button.
4. Select Speed Dial, and then press the
button.
5. Select the desired speed dial number between 01 and 99, and then press the
button.
6. Select Name, and then press the
button.
7. Enter the name using the numeric keypad, and then press the
button.
8. Select Phone Number, and then press the
button.
9. Enter the number you want to store using the numeric keypad, and then press the
button.
To insert a pause between numbers, press the Redial/Pause button and confirm that “-” appears
on the LCD panel.
10. Select Apply Settings, and then press the
button.
11. Select Yes, and then press the
button.
12. Repeat steps 5 to 11 as needed to add speed dial numbers.
13. To quit adding speed dial numbers, keep pressing the
(Back) button until the LCD panel
shows Select Function.
AL-MX200 Series User’s Guide
Faxing 242