If you want to use your computer modem for faxing or dial-up internet connection, connect the
computer modem directly to the rear of your printer with the TAD as shown above.
❏ Place your printer in the Ans/FAX Mode and specify for Auto Ans. Ans/FAX a period of time
before the TAD responds.
❏ Turn off the computer modem's fax-receive feature.
❏ Do not use the computer modem while your printer is sending or receiving a fax.
❏ Follow the instructions provided with your computer modem and fax application to fax via the
computer modem.
Setting Sounds
Speaker Volume
1. Press the System button.
2. Select Admin Menu, and then press the
button.
3. Select Fax Settings, and then press the
button.
4. Select Line Monitor, and then press the
button.
5. Select the desired volume, and then press the
button.
6. Reboot the printer by turning the power switch off and then on.
Ringer Volume
1. Press the System button.
2. Select Admin Menu, and then press the
button.
3. Select Fax Settings, and then press the
button.
4. Select Ring Tone Volume, and then press the
button.
AL-MX200 Series User’s Guide
Faxing 257
To Next Page
Loading...
