Taking the Copy lock option as an example, the following procedure explains how to enable or disable
the option. Use the same procedure to enable or disable the FAX, Scan, and Print from USB lock
options.
1. Press the System button.
2. Select Admin Menu, and then press the
button.
3. Select Secure Settings, and then press the
button.
4. Select Panel Lock, and then press the
button.
5. Select Panel Lock Set, and then press the
button.
6. Select Enable, and then press the
button.
7. If necessary, select Change Password, and change the password using the numeric keypad. Then,
press the
button.
Note:
The factory-default panel password is 0000.
8. Press the
(Back) button.
9. Select Service Lock, and then press the
button.
10. Select Copy, and then press the
button.
11. Select one of the following options, and then press the
button.
❏ Unlocked
❏ Locked
❏ Password Locked
Changing the Power Saver Mode Settings
The printer enters a power saver mode after the specified time period of inactivity. You can set Power
Saver Timer to place the printer in either of the power saver modes.
AL-MX200 Series User’s Guide
Using the Operator Panel Menus and Keypad 324
To Next Page
Loading...
