Lighten/Darken
Purpose:
To specify the default fax density level.
Values:
Lighten2
Makes the fax lighter than the source document. Works well with dark print.
Lighten1
Normal
*
Works well with standard typewritten or printed documents.
Darken1
Makes the fax darker than the source document. Works well with light print or
faint pencil markings.
Darken2
*
Factory default menu setting
Delayed Start
Purpose:
This feature enables you to set a specific time for the fax transmission to start. Once Delayed Start
mode is activated, your printer stores all of the documents to be faxed into its memory and sends them
at the specified time. After faxing in the Delayed Start mode is complete, the data in the memory is
cleared.
Values:
21:00
*
/PM 9:00
*
Specify the fax transmission start time when sending a fax at a specified time.
Which factory default menu setting displays depends on the value set for Time
Format under the System Settings menu. See “Changing the Clock Mode”
on page 224 for more information.
0:00 - 23:59 / AM/PM 1:00 - 12:59
*
Factory default menu setting
Note:
A maximum of 19 delayed fax jobs can be stored in this printer.
Print from USB Defaults
Use the Print from USB Defaults menus to configure the Print From USB Memory feature.
2-Sided
Purpose:
To specify whether to print on either side of paper.
AL-MX200 Series User’s Guide
Using the Operator Panel Menus and Keypad 317
To Next Page
Loading...
