7. Press the (Clear All) button on the operator panel for three seconds.
The print media is fed to push out the jammed paper.
Clearing Paper Jams From the Center Output Tray
Important:
❏ To prevent electric shock, always turn off the printer and disconnect the power cord from the
grounded outlet before performing maintenance.
❏ To avoid burns, do not clear paper jams immediately after printing. The fusing unit becomes
extremely hot during use.
❏ Protect the OPC drum against bright light. If the rear cover is left open for more than five minutes,
print quality may deteriorate.
Note:
To resolve the error displayed on the LCD panel, you must clear all print media from the print media
path.
1. Push the rear cover handle and open the rear cover.
AL-MX200 Series User’s Guide
Troubleshooting 342
To Next Page
Loading...
