EasyManua.ls Logo

Epson WorkForce AL-MX200DNF

Epson WorkForce AL-MX200DNF
410 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Items Description
Transmission Time 3 seconds (V.34)
Important:
When transmitting an A4 size 700-character document in the standard quality
(8 × 3.85 lines/mm) and high speed mode (28.8 kbps or above: JBIG). This is only
the transmission speed for image information and does not include the
controlling time for the communication. Note that the actual transmission time
depends on the content of documents, the machine that the recipient uses,
and the status of the communication line.
Transmission Mode ITU-T Super G3, ITU-T G3 ECM, ITU-T G3
Scanning Resolution
400 × 400 pixel/25.4 mm (R16 × 15.4 line/mm)
300 × 300 pixel/25.4 mm (R8 × 15.4 line/mm)
200 × 200 pixel/25.4 mm (R8 × 7.7 line/mm)
200 × 100 pixel/25.4 mm (R8 × 3.85 line/mm)
Coding Method Monochrome: 1 bit, JBIG, MMR, MR, MH encoding
Color: Not supported.
Transmission Speed V.34 (33.6 /31.2 /28.8 /26.4 /24 /21.6 /19.2 /16.8 /14.4 /12 /9.6 /7.2 /4.8 /2.4kbps)
V.17 (14.4 /12 /9.6 /7.2kbps)
V.29 (9.6 /7.2kbps)
V.27ter (4.8 /2.4kbps)
No. of Fax Lines RJ-11, 1 line
PSTN, PBX. Leased line (3.4KHz/2-wire)
Direct Fax Function
Items Description
Document Size A4, Letter, Folio, Legal
Transmission Speed Same as the Fax function
Transmission Resolution Same as the Fax function
Applicable Lines Same as the Fax function
AL-MX200 Series User’s Guide
Specifications 24

Table of Contents

Other manuals for Epson WorkForce AL-MX200DNF

Related product manuals