Copy Quality Problems
Problem Action
There are lines or streaks in copies
made from the ADF.
There is debris on the ADF glass. When scanning, the paper from the ADF passes
over the debris creating lines or streaks.
Clean the ADF glass with a lint free cloth.
See Also:
“Cleaning the Scanner” on page 380
There are spots in copies taken from the
document glass.
There is debris on the document glass. When scanning, the debris creates a spot on
the image.
Clean the document glass with a lint free cloth.
See Also:
“Cleaning the Scanner” on page 380
The reverse side of the original is
showing on the copy.
On the Copy menu, enable Auto Exposure.
For information on turning Auto Exposure on and off, see “Auto Exposure” on
page 175.
Light colors are washed out or white on
the copy.
On the Copy menu, disable Auto Exposure.
For information on turning Auto Exposure on and off, see “Auto Exposure” on
page 175.
Image is too light or dark. Use the Lighten/Darken option on the Copy menu.
For information on making the image lighter or darker, see “Lighten/Darken” on
page 173.
Note:
If the problem continues even though you have taken suggested actions described above, contact our local
representative office or authorized dealer.
AL-MX200 Series User’s Guide
Troubleshooting 360
To Next Page
Loading...
