1 To the wall jack
2Printer
3Line
4 Telephone Answering Device
5 Phone
You can connect a telephone answering device (TAD) directly to the rear of your printer as shown
above.
❏ Place your printer in the Ans/FAX Mode and specify for Auto Ans. Ans/FAX a period of time
before the TAD responds.
❏ When the TAD picks up an incoming call, the printer monitors and takes the line if it hears a fax
tone and then starts receiving the fax.
❏ When the TAD is turned off, the printer automatically enters the FAX Mode after a predefined
period of time.
Using a Computer Modem
1 To the internet
2Computer
3Printer
4Line
5 Telephone Answering Device
6 Phone
AL-MX200 Series User’s Guide
Faxing 256
To Next Page
Loading...
