Epson WorkForce AL-MX200DNF - Security and Access Control

0m
*
Select the altitude of the location where the printer is installed.
1000m
2000m
3000m
*
Factory default menu setting
Secure Settings
Use the Secure Settings menu to set a password to limit access to the operator panel menus. This
prevents the printer settings from being changed accidentally.
Panel Lock
Purpose:
To restrict access to Admin Menu and Report / List with a password.
See Also:
“Panel Lock Feature” on page 322
Note:
You can select Disable for Panel Lock Set when all items under Service Lock are set to
Unlocked and Secure Receive Set is set to Disable.
Values:
Panel Lock Set
Disable
*1
Does not restrict access to Admin Menu and Report / List with a
password.
Enable
Restricts access to Admin Menu and Report / List with a password.
Change
Password
*2
0000
*1
-9999
Sets or changes the password required to access Admin Menu and
Report / List.
*1
Factory default menu setting
*2
Not displayed when Panel Lock Set is set to Disable.
Service Lock
Purpose:
To specify whether to enable each of the printer services or to require a password to use the services,
and to set or change the password.
AL-MX200 Series User’s Guide
Using the Operator Panel Menus and Keypad 302