Epson WorkForce AL-MX200DNF

See Also:
“Limiting Access to Copy, Fax, Scan, and USB Direct Print Operations” on page 323
Note:
You can access to the items under Service Lock only when Panel Lock Set is set to Enable.
Values:
Copy
Unlocked
*1
Enables the Copy function.
Locked
Disables the Copy function.
Password Locked
Enables the Copy function, but requires a password.
FAX
Unlocked
*1
Enables the Fax function.
Locked
Disables the Fax function (the printer will not send or receive faxes).
Password Locked
Enables the Fax function, but requires a password to send faxes (does
not require a password to receive incoming faxes).
Scan
Unlocked
*1
Enables the Scan function.
Locked
Disables the Scan function.
Password Locked
Enables the Scan function, but requires a password.
Print from USB
Unlocked
*1
Enables the Print From USB Memory feature.
Locked
Disables the Print From USB Memory feature.
Password Locked
Enables the Print From USB Memory feature, but requires a password.
Change
Password
*2
0000
*1
-9999
Sets or changes the password required to use the Copy, Fax, and Scan
functions and the Print From USB Memory feature.
*1
Factory default menu setting
*2
Displayed only when any of the Service Lock items is set to Password Locked.
Secure Receive
Purpose:
To specify whether to require a password to print incoming faxes, and to set or change the password.
When Secure Receive Set is set to Enable, the printer stores incoming faxes and prints them
when the correct password is entered on the operator panel.
Note:
You can access to the items under Secure Receive only when Panel Lock Set is set to Enable.
AL-MX200 Series User’s Guide
Using the Operator Panel Menus and Keypad 303