Epson WorkForce AL-MX200DNF

Print Always
Prints a transmission report after every fax transmission.
Print On Error
*
Prints a transmission report only when an error occurs.
Print Disable
Does not print a transmission report after a fax transmission.
*
Factory default menu setting
Fax Broadcast
Purpose:
To specify whether to print a transmission report after every fax transmission to multiple destinations
or only when an error occurs.
Values:
Print Always
*
Prints a transmission report after every fax transmission to multiple
destinations.
Print On Error
Prints a transmission report only when an error occurs.
Print Disable
Does not print a transmission report after a fax transmission to multiple
destinations.
*
Factory default menu setting
Region
Purpose:
To specify the region where the printer is used.
System Settings
Use the System Settings menu to configure a variety of printer features.
Power Saver Timer
Purpose:
To specify a time period before the printer enter each power saver mode.
Values:
Low Power
Timer
1min
*
By default, the printer enters Low Power mode in one
minute of inactivity after completion of the last job.
You can change the Low Power Timer setting within
a range from 1 to 45 minutes.
1min - 45min
AL-MX200 Series User’s Guide
Using the Operator Panel Menus and Keypad 292