Epson WorkForce AL-MX200DNF - Page 291

Normal
*
Sets the external telephone hook detection threshold to Normal.
Higher
Sets the external telephone hook detection threshold to Higher.
*
Factory default menu setting
Modem Speed
Purpose:
To specify the fax modem speed when a fax transmission or reception error occurs.
Values:
2.4 Kbps
4.8 Kbps
9.6 Kbps
14.4 Kbps
33.6 Kbps
*
*
Factory default menu setting
Fax Activity
Purpose:
To specify whether to automatically print the Fax Activity Report after every 50 incoming and
outgoing fax communications.
Values:
Auto Print
*
Automatically prints the Fax Activity Report after every 50 incoming and
outgoing fax communications.
No Auto Print
Does not automatically print the Fax Activity Report.
*
Factory default menu setting
Fax Transmit
Purpose:
To specify whether to print a transmission report after every fax transmission or only when an error
occurs.
Values:
AL-MX200 Series User’s Guide
Using the Operator Panel Menus and Keypad 291