6. Enter a name, a phone number, and an e-mail address in the Name, Phone Number and E-mail
Address fields.
7. Click the Apply button.
Configuring an SMTP Server
To use the Scan to E-Mail feature, you first need to set up your SMTP (Simple Mail Transfer Protocol)
server information. SMTP is a protocol for sending e-mail.
The following procedure uses Windows 7 as an example.
1. Launch your web browser.
2. Enter the IP address of the printer in the address bar, and then press the Enter key.
EpsonNet Config appears on your browser.
Note:
For details on how to check the IP address of the printer, see “Verifying the IP Settings” on
page 47.
3. Click the Properties tab.
AL-MX200 Series User’s Guide
Scanning 214
To Next Page
Loading...
