Protrudent/Bumpy Paper
Problem Action
Printed surface got protrudent/bumpy. Clean up the fusing unit.
1. Load one sheet of paper in the paper tray, and then print a solid image all over
paper.
2. Load the printed sheet with the print surface facing down, and then print a blank
sheet of paper.
Note:
If the problem continues even though you have taken suggested actions described above, contact our local
representative office or authorized dealer.
Copy Problem
Problem Action
A document loaded in the ADF cannot
be copied.
Ensure that the ADF cover is firmly closed.
AL-MX200 Series User’s Guide
Troubleshooting 359
To Next Page
Loading...
