Note:
The window to select a printer appears in this step when multiple print drivers are installed on your
computer. In this case, click the name of the desired printer listed in Printer Name.
The Printer Setting Utility starts.
2. Click the Printer Settings Report tab.
3. Select Reports from the list at the left side of the page.
The Reports page appears.
4. Click the System Settings button.
The System Settings page is printed.
If the IP address is 0.0.0.0 (the factory default) or 169.254.xx.xx, an IP address has not been
assigned.
See Also:
“Assigning an IP Address (for IPv4 Mode)” on page 45
Installing Print Drivers on Computers Running Windows
You can use three types of print drivers on your printer:
❏ PCL print driver
See “Using the PCL print driver” on page 50.
❏ PCL compatible Universal P6 print driver
See “Using Epson Universal P6 Printer Driver” on page 97.
❏ PostScript Level3 Compatible print driver
See PostScript Level3 Compatible User’s Guide.
AL-MX200 Series User’s Guide
Printer Connection and Software Installation 49
To Next Page
Loading...
