The following procedure uses Windows 7 as an example.
Using EpsonNet Config
1. Launch your web browser.
2. Enter the IP address of the printer in the address bar, and then press the Enter key.
EpsonNet Config appears on your browser.
Note:
For details on how to check the IP address of the printer, see “Verifying the IP Settings” on
page 47.
3. Click the Address Book tab.
If a user name and password entry is prompted, enter the correct user name and password.
Note:
The default User ID and password are both blank (NULL).
4. Under Fax / E-mail, click Fax Group.
AL-MX200 Series User’s Guide
Faxing 250
To Next Page
Loading...
