Epson WorkForce AL-MX200DNF

Out of Paper Off
Does not emit a tone when the printer runs out of paper.
Min
Emits a tone at the specified volume when the printer runs out of
paper.
Middle
*
Max
All Tones Off
Disables all the alert tones.
Min
Sets the volume of all the alert tones at once.
Middle
*
Max
*
Factory default menu setting
mm / inch
Purpose:
To specify the measurement unit after the numeric value displayed on the operator panel.
Values:
Millimeters (mm)
*
Inches (")
*
Factory default menu setting
2-Sided Report
Purpose:
To specify whether to print a report on either side of paper.
Values:
2-Sided
Prints a report on either side of paper.
1-Sided
*
Prints a report on the single side of paper.
*
Factory default menu setting
Low Toner Alert Msg
Purpose:
To specify whether to show the alert message when the toner is low.
AL-MX200 Series User’s Guide
Using the Operator Panel Menus and Keypad 296