Epson WorkForce AL-MX200DNF

4. Select the desired setting or enter the value using the numeric keypad, and then press the
button.
5. Repeat steps 3 and 4, as needed.
6. Press the
(Start) button to begin scanning.
Emailing the Scanned Image
To temporarily change a scan setting when emailing the scanned image:
1. Press the
(Scan) button.
2. Select Scan to E-Mail, and then press the
button.
3. Select an e-mail recipient, and then press the
button.
4. Select the desired menu item, and then press the
button.
5. Select the desired setting or enter the value using the numeric keypad, and then press the
button.
6. Repeat steps 4 and 5, as needed.
7. Press the
(Start) button to begin scanning.
AL-MX200 Series User’s Guide
Scanning 220