Clearing Paper Jams From the Priority Sheet Inserter (PSI)
Important:
❏ Do not put excessive force on the front cover when removing the jammed paper. Doing so could
damage the cover.
❏ To prevent electric shock, always turn off the printer and disconnect the power cord from the
grounded outlet before performing maintenance.
❏ To avoid burns, do not clear paper jams immediately after printing. The fusing unit becomes
extremely hot during use.
❏ Protect the OPC drum against bright light. If the rear cover is left open for more than five minutes,
print quality may deteriorate.
Note:
To resolve the error displayed on the LCD panel, you must clear all print media from the print media
path.
1. Push the rear cover handle and open the rear cover.
2. Lift up the levers.
AL-MX200 Series User’s Guide
Troubleshooting 338
To Next Page
Loading...
