17. Ensure that the wireless network settings are displayed, and then click Apply.
A confirmation window appears.
18. Click Yes.
19. Wait a few minutes until the printer restarts to establish a wireless network connection and the
Configuration Complete screen appears.
20. Click Print Printer Setting.
21. Confirm that “Link Quality” is shown as “Good”, “Acceptable”, or “Low” on the report.
Note:
When “Link Quality” is shown as “No Reception”, check if the wireless network settings are correctly
configured. To reconfigure the wireless network settings, click Next on the Configuration
Complete screen and then click Return.
22. Click Next.
AL-MX200 Series User’s Guide
Printer Connection and Software Installation 61
To Next Page
Loading...
