EpsonNet Config appears on your browser.
6. Change the wireless network settings for the printer on EpsonNet Config.
7. Reboot the printer.
8. Restore the wireless network settings on your computer.
Note:
If the operating system on your computer provides a wireless configuration software, use it to change
the wireless network settings. Or you can change the wireless network settings using the tool provided
with the operating system. See the instructions below.
For Windows XP and Windows Server 2003:
a
Select Network Connections from Control Panel.
b
Right-click Wireless Network Connection and select Properties.
c
Select the Wireless Networks tab.
d
Ensure that the check box for Use Windows to configure my wireless network settings
is selected.
e
Click Advanced.
AL-MX200 Series User’s Guide
Printer Connection and Software Installation 85
To Next Page
Loading...
