Fagor CNC 8070 - Define a new profile, enlarge an existing one or import one from a file.

·174·
Operating manual
CNC 8070
9.
PROFILE EDITOR
(REF: 1505)
Define a new profile, enlarge an existing one or import one from a file.
9.2 Define a new profile, enlarge an existing one or import one from a
file.
With the softkey menu of this screen, it is possible to define any profile, a circular or a
rectangular one. It can also be used to enlarge a profile already defined or import a profile
saved in DXF format.
Softkey. Meaning.
Profile Softkey for editing any profile by defining the straight and curved sections
that make it up.
See "9.2.1 Define any profile using straight and curved sections." on
page 175.
Circle Softkey for quickly defining a circular profile.
See "9.2.2 Define a circular profile." on page 177.
Rectangle Softkey for quickly defining a rectangular profile.
See "9.2.3 Define a rectangular profile." on page 178.
Expand a profile Softkey for adding straight and curved sections to the profile.
See "9.2.4 Enlarge a profile." on page 178.
Import profile Softkey for importing a profile in DXF format.
See "9.2.5 Import a profile from a DXF file." on page 179.