Fagor CNC 8070 - Chapter 17 Utilities Mode; Interface description.

CNC 8070
(REF: 1505)
17
·275·
UTILITIES MODE
17.1 Interface description.
The utilities mode screen shows the following information:
A Folder tree. The tree shows the folders that may be accessed from the CNC, as well their
structure.
B List of files saved in the selected folder.
When selecting a folder, the bottom of the window will show the number of files contained
in the folder and the total size (bytes) they amount to.
Folder tree. Show the properties of an entity or folder.
If a unit or folder has been selected, pressing the "=" will display the properties window.
Depending on the size of the folder, the CNC may show a progress bar while it calculates
its size.
A B