Operating manual
CNC 8070
PLC
18.
(REF: 1505)
·327·
"Messages" service
18.13.2 Editing the message and error table
To add a new message or error to the table, press the "New message" or "New error" softkey.
The CNC adds a new row to the table and it identifies it with the label -MSG- or -ERR-,
indicating that it corresponds to a message or to an error. To delete a message or an error
from the table, select it with the cursor and press the "Delete" softkey.
To edit or modify the table data, use the cursor to select the field whose value is to be changed
and define the data as follows:
• The number and text of the message or error is entered directly from the keyboard.
• The "show" option is turned on and off with the [SPACE] key.
• The "EMERGEN" option is turned on and off with the [SPACE] key. This option only
appears when editing errors.
• The file for additional information may be entered directly or may be selected with the
"Associate file" softkey.
Press [ENTER] every time a data is edited to accept the new value or [ESC] to cancel it.
To Next Page
Loading...
