Fagor CNC 8070 - M Function Setting Table

·336·
Operating manual
CNC 8070
19.
MACHINE PARAMETERS
(REF: 1505)
Parameter table description
19.2.1 "M" function setting table
This table is accessed using the M-function machine parameter "DATA" and it has the
following structure:
A Name of the selected machine parameter table.
B List of user defined "M" functions.
C Type of synchronism.
D Associated subroutine.
E Time for execution time estimate.
F Send the M function to the PLC during block search.
G Function describing comment.
H Parameter description.
The section on "19.3.1 Data editing and validation" in this chapter shows how to edit the
parameters of the tables.
A
B C D E F G
H
To obtain further information about the data appearing in the table, refer to the chapter on machine
parameters of the installation manual.
i