Fagor CNC 8070 - Chapter 11 HD Graphic Environment (Mill Model); Description of the graphic environment.

CNC 8070
(REF: 1505)
11
·199·
HD GRAPHIC ENVIRONMENT (MILL
MODEL)
11.1 Description of the graphic environment.
The graphic environment displays a graphic representation of the program that is being
executed or simulated and take measurements on the graphics.
A Display area. Shows a graphic representation of the tool paths or of the part as the
program is being executed or simulated.
B Blocks of the program or subroutine being executed. During execution, the cursor shows
the block being executed.
C Current axis position referred to part zero, referred to the tool tip.
D Active "G" functions.
E Tool related information; tool number "T" and tool offset "D".
F Information related to the feedrate "F" of the axes:
G Information related to the spindle speed "S".
"F real" Real (actual) feedrate of the axes.
"F prog" Programmed feedrate.
"S real" Real (actual) spindle speed.
"S prog" Programmed speed.
A
B
C
D
E
F
G