Fagor CNC 8070 - Find Text

·342·
Operating manual
CNC 8070
19.
MACHINE PARAMETERS
(REF: 1505)
Operations with tables
19.3.3 Find text.
This softkey is used to find text or a value in the table. After pressing this softkey, the CNC
shows a dialog box requesting the text or value to be found. It is also possible to select
whether the search must start at the beginning of the table or at the current cursor position.
Key. Meaning.
Move the cursor.
It selects an option from a group.
Start the search.
Cancel the search and close the dialog box.
ENTER
ESC
After defining the search options, press [ENTER] to do the search or [ESC] to cancel it.
Pressing [ENTER] positions the cursor in the first field that matches the search parameters.
Pressing this FIND icon again will allow repeating the search or defining a new one.