Operating manual
CNC 8070
UTILITIES MODE
17.
(REF: 1505)
·283·
Data safety backup. Backup - Restore
17.6 Data safety backup. Backup - Restore
This option may be used to make a backup of the CNC configuration (OEM and user data)
to be restored later one if necessary. Backup/restore is not possible while the CNC is in
execution.
Make a backup of CNC data.
Data backup may be carried out when the CNC has been started up in SETUP mode or in
USER mode.
On Windows explorer, select the folder where the backup will be saved. Press the "BACKUP"
softkey and the CNC will display a window with the options to select the data to include in
the backup.
Restore data from the backup .
OEM data may only be restored whe the CNC has been started up in SETU mode; if it has
been started up in USER mode, only user data may be restored and the rest of the options
are disabled. The restore option is protected by the "Machine parameters" password.
On Windows explorer, select the folder where the backup has been saved. Press the
"RESTORE" softkey and the CNC will display a window with the options to select the data
to include in the backup. If the selected folder does not contain one of the backups, its option
will appear disabled. The CNC application must be restarted after restoring a backup.
Select the data to be included in the backup or restore.
The selected options will be kept until they are modified.
OEM data.
• Machine parameters. Backup/restore of CNC machine parameters. The backup saves
the data in the BACKUP_OEM_MP.zip file.
In order for the CNC to properly do the backup and restore of the volumetric
compensation tables, it is recommended to save them in the folder ...MTB/SUB.
• Tables. Backup/restore of CNC tables; fixtures, zero offsets and arithmetic parameters.
The backup saves the data in the BACKUP_OEM_TABLES.zip file.
• Tools and tool magazines. Backup/restore of tool and tool magazine tables. The backup
saves the data in the BACKUP_OEM_MZTOOLS.zip file.
• Servo parameters. Backup/restore of drive machine parameters. The backup saves the
data in the BACKUP_OEM_DRIVEMP.zip file.
• Subroutines. Backup/restore of OEM subroutines. The backup saves the data in the
BACKUP_OEM_SUB.zip file.
• PLC. Backup/restore of the PLC; PLC programs, messages and errors. The backup
saves the data in the BACKUP_OEM_PLC.zip file.
• Configuration and screens. Backup/restore of CNC configuration and screens. The
backup saves the data in the BACKUP_OEM_CONFIG.zip file.
The CNC only allows doing the backup or restore when there is no power (e.g. E-stop button pressed).
Softkey. Meaning.
Make a backup of CNC data.
Restore data from the backup .
To Next Page
Loading...
