Fagor CNC 8070 - Data of the T Tools (Standard Page - Screen-)

Operating manual
CNC 8070
TOOL AND MAGAZINE TABLE
16.
(REF: 1505)
·261·
Tool table (simple mode).
16.4.4 Data of the T tools (standard page - screen-).
The standard page (screen) shows the main data of the tools, in this case, the ones for
turning. The table highlights in color the active tool.
Column. Description.
T Tool number.
D Tool offset number.
Mz Magazine it belongs to.
icon Type of tool offset.
icon Location code (shape).
icon Tool-holder orientation.
Name Tool name.
A Cutter angle.
B Cutter width.
C Cutting angle of the cutter.
Lc Cutting length.
Rp Tip radius.
Rp W Tool tip radius wear.