Operating manual
CNC 8070
HD GRAPHIC ENVIRONMENT (MILL MODEL)
11.
(REF: 1505)
·207·
Delete the graphic.
11.6 Delete the graphic.
This option deletes the graphic representation; deletes the drawn tool paths and resets the
solid to its initial dimensions.
11.7 Define the dimensions of the parts and the size of the graphic.
This option may be used to define the parts to be used on the graphics. The graphics may
display up to four different parts at the same time and it is possible to work with all of them
at the same time or with each one separately. Each of the parts may be referred to a different
origin, associated with a particular channel and have different zero offsets.
Edit and display the parts.
This softkey shows the following box of options.
A Part number.
B Part type; rectangular or circular.
C Part dimensions. To include a zero offset in the part, edit the zero offset at the minimum
values of the axes.
D Channel used to define the origins and the dimensions. The box will show the axes of
the selected channel.
E Channels the part is associated with, to display it. Since several channels may work on
a part, in order to be able to keep displaying the machining of that part when changing
channels, it is necessary to define which channels are working on that part.
F Display or hide the defined part.
Automatic dimensions.
The CNC sets the dimensions that it considers best according to the movements
programmed.
Softkey. Function.
Edit and display the parts.
Automatic dimensions.
Load part.
Save parts
To Next Page
Loading...
