Fagor CNC 8070 - Page 5

Operating manual
CNC 8070
(REF: 1505)
·5·
9.2 Define a new profile, enlarge an existing one or import one from a file. ...................... 174
9.2.1 Define any profile using straight and curved sections.............................................. 175
9.2.2 Define a circular profile. ........................................................................................... 177
9.2.3 Define a rectangular profile. ..................................................................................... 178
9.2.4 Enlarge a profile. ...................................................................................................... 178
9.2.5 Import a profile from a DXF file. ............................................................................... 179
9.3 Modify a profile and insert corners............................................................................... 181
9.4 Configuring the profile editor. Displayed area.............................................................. 183
9.5 Configuring the profile editor. Define the work plane. .................................................. 183
9.6 End the session at the editor. ...................................................................................... 183
9.7 Examples of how to define profiles. ............................................................................. 184
9.7.1 Profile editor. Example 1 (milling). ........................................................................... 184
9.7.2 Profile editor. Example 2 (milling). ........................................................................... 185
9.7.3 Profile editor. Example 3 (milling). ........................................................................... 187
9.7.4 Profile editor. Example 4 (lathe)............................................................................... 188
CHAPTER 10 GRAPHIC ENVIRONMENT (MILL MODEL)
10.1 Description of the graphic environment. ...................................................................... 189
10.1.1 Softkey menus. ........................................................................................................ 190
10.2 Type of graphics .......................................................................................................... 191
10.3 Zoom............................................................................................................................ 192
10.4 Dimensions ..................................................................................................................193
10.5 Point of view................................................................................................................. 193
10.6 Measurement ............................................................................................................... 194
10.7 Clear screen................................................................................................................. 195
10.8 Colors........................................................................................................................... 195
10.9 Options......................................................................................................................... 196
10.10 Real coordinates.......................................................................................................... 197
10.11 Real coordinates with enlarged error ........................................................................... 197
10.12 Simulation speed ......................................................................................................... 197
CHAPTER 11 HD GRAPHIC ENVIRONMENT (MILL MODEL)
11.1 Description of the graphic environment. ...................................................................... 199
11.1.1 Softkey menus. ........................................................................................................ 200
11.2 Move, rotate and zoom in or out on the graphic. ......................................................... 201
11.3 Select the type of view. ................................................................................................ 202
11.4 Configure the graphics (number of windows, colors, etc.). .......................................... 203
11.5 Actions (move sections and print graphics). ................................................................ 206
11.6 Delete the graphic........................................................................................................ 207
11.7 Define the dimensions of the parts and the size of the graphic. .................................. 207
11.8 Measure the part.......................................................................................................... 208
11.9 Simulation speed. ........................................................................................................ 208
CHAPTER 12 GRAPHIC ENVIRONMENT (LATHE MODEL)
12.1 Description of the graphic environment. ...................................................................... 209
12.1.1 Softkey menus. ........................................................................................................ 210
12.2 Type of graphics .......................................................................................................... 211
12.3 Zoom............................................................................................................................ 212
12.4 Dimensions ..................................................................................................................213
12.5 Measurement ............................................................................................................... 213
12.6 Clear screen................................................................................................................. 214
12.7 Colors........................................................................................................................... 214
12.8 Options......................................................................................................................... 215
12.9 Real coordinates .......................................................................................................... 216
12.10 Real coordinates with enlarged error ........................................................................... 216
12.11 Simulation speed ......................................................................................................... 216
CHAPTER 13 HD GRAPHIC ENVIRONMENT (LATHE MODEL)
13.1 Description of the graphic environment. ...................................................................... 217
13.1.1 Softkey menus. ........................................................................................................ 218
13.2 Move, rotate and zoom in or out on the graphic. ......................................................... 219
13.3 Select the type of view. ................................................................................................ 220
13.4 Configure the graphics (number of windows, colors, etc.). .......................................... 221
13.5 Actions (move sections and print graphics). ................................................................ 224
13.6 Delete the graphic........................................................................................................ 225
13.7 Define the dimensions of the parts and the size of the graphic. .................................. 225
13.8 Measure the part.......................................................................................................... 226
13.9 Simulation speed. ........................................................................................................ 226