Fluke 990DSL - Page 218

990DSL
Users Manual
8-4
2. Access the following web address (URL):
http://www.flukenetworks.com/CopperPro/Update/versionxxx/cpflash.exe
The browser displays the
File Download window.
3. In the
File Download window, select Run this program from its current
location
. Then, click OK.
The download process begins. After the program is downloaded, the
browser may display a
Security Warning window.
4. Click
Yes if the Security Warning window is displayed.
Your PC displays this message: “Searching for CopperPro”.
After the program detects the CopperPro, it begins updating the tester’s
Flash memory. Messages are displayed on the PC to indicate the type of
data that is being transferred from the PC to the CopperPro.
Note
If the program does not detect the CopperPro, it prompts you to
supply the correct serial port.
CopperPro Flash Loader
V0.01
Fluke Networks 2001 All rights reserved
Processing block 000
Copyright
acy88s.eps
Figure 8-2. Final Download Screen