5 Tools
114
Tools
5
z
Paper Size
When using Trays 1 and 2, you can load both standard size paper and non-standard size
paper.
When you load non-standard size paper in Tray 1, select [Custom Size], and then set the size
in the X (width) direction between 182 and 458 mm and the Y (length) direction between 140
and 300 mm in 1 mm increments. For Tray 2, select [Custom Size], and then set the size in
the X (width) direction between 182 and 432 mm and the Y (length) direction between 140
and 297 mm in 1 mm increments.
When using Trays 3 and 4, and 6 (A4 High Capacity Feeder), you can load standard size
paper only. Select [Auto Detect].
When you load non-standard size paper in Trays 6 and 7 (High Capacity Feeder C1-DS), set
the size in the X (width) direction between 182 and 488 mm and the Y (length) direction
between 182 and 330 mm in 1 mm increments.
z
Paper Color
Set the color of paper. The paper color selected here is displayed as the paper color on the
[Paper Supply] screen.
z
Auto Paper Select
Set the condition for Auto Paper selection. When the color mode selected is used, Auto Paper
selection is enabled. Select from [All Colors], [Color], and [Black & White].
Automatic tray selection means that a tray containing the appropriate paper is automatically
selected by the machine for copying or printing.
Customize Paper Supply Screen
Select whether the setting items specified in [Paper Size] or [Auto Paper Select] in [Paper
Tray Attributes] are to be displayed on the [Paper Supply] screen.
Disabled
Does not display the items specified in [Paper Size].
Size Detection
Displays the setting in [Paper Size].
Usage (Auto Paper Select)
Displays the setting in [Auto Paper Select].
Paper Tray Attributes on Setup Screen
Select whether or not to display [Paper Tray Attributes] in the [Setup] screen or not.
This setting allows you to select the size and type of paper without entering the System
Administration mode.
Paper Tray Attributes During Loading
Select whether or not to display the [Paper Tray Attributes] screen after the tray is pulled out
or inserted in.
This setting applies to Trays 1 to 4, 6 (optional), and 7 (optional). You cannot apply this
setting to Tray 5.
Paper Tray Priority
Set the priority of the trays to use when paper of the same size and the same orientation is
set in the multiple trays or print data does not include the paper tray information for automatic
tray selection.
Auto Paper selection means that a tray containing the appropriate paper is automatically
selected by the machine for copying or printing.
This setting applies to Trays 1 to 4, 6 (optional), and 7 (optional). You cannot apply this
setting to Tray 5.
To Next Page
Loading...
