Fuji Xerox Color 550

Error Code
199
Problem Solving
7
012-248
[Cause] Finisher Tray malfunction
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then
switch on the machine power. If the error still is not resolved, contact your local
Fuji Xerox representative.
012-254
[Cause] Folding Unit malfunction
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then
switch on the machine power. If the error still is not resolved, contact your local
Fuji Xerox representative.
012-320
012-321
012-322
012-323
012-324
012-325
012-330
012-332
012-335
[Cause] An error occurred in the finisher.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then
switch on the machine power. If the error still is not resolved, contact your local
Fuji Xerox representative.
112-963
[Cause] The staple waste container for the finisher is almost full.
[Remedy] Replace the staple waste container.
016-210
016-211
016-212
016-213
016-214
016-215
016-216
016-217
016-219
[Cause] An error occurred in the software.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then
switch on the machine power. If the error still is not resolved, contact your local
Fuji Xerox representative.
016-220
016-221
016-222
016-223
016-224
016-225
016-226
016-227
016-228
[Cause] An error occurred in the document feeder.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then
switch on the machine power. If the error still is not resolved, contact your local
Fuji Xerox representative.
016-229
016-230
[Cause] An error occurred in the software
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then
switch on the machine power. If the error still is not resolved, contact your local
Fuji Xerox representative.
016-233
[Cause] An error occurred in the software
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then
switch on the machine power. If the error still is not resolved, contact your local
Fuji Xerox representative.
Error Code Cause and Remedy
* If you cannot resolve an error despite following the instructions described in the table, contact your local Fuji Xerox
representative. The contact number is printed on the label or card attached on the machine.