Fuji Xerox Color 550

Error Code
203
Problem Solving
7
024-340
024-341
024-342
024-343
024-345
024-346
024-347
024-348
024-349
024-350
024-351
024-352
024-353
024-354
024-355
024-356
024-357
024-358
024-359
024-360
024-361
024-362
024-363
024-364
024-365
024-366
024-367
024-368
024-370
024-371
024-372
024-373
024-375
[Cause] An error occurred.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then
switch on the machine power. If the same message is displayed again, contact
your local Fuji Xerox representative.
024-700
[Cause] The memory capacity or hard disk required to use the optional feature is not
installed.
[Remedy] Switch off the machine power, and then switch it on again after the touch screen
goes out. If the error still is not resolved, contact your local Fuji Xerox
representative.
040-210
[Cause] An error occurred with the interface module.
[Remedy] Turn the power off and on, and then try the same operation again.
Error Code Cause and Remedy
* If you cannot resolve an error despite following the instructions described in the table, contact your local Fuji Xerox
representative. The contact number is printed on the label or card attached on the machine.