7 Problem Solving
206
Problem Solving
7
059-313
061-310
061-311
061-313
061-315
061-317
061-319
061-320
061-321
061-323
061-325
061-326
061-327
061-328
061-329
061-334
061-335
061-336
061-337
061-338
061-339
061-340
061-341
061-342
061-343
061-348
061-349
061-380
061-381
061-382
061-383
[Cause] An error occurred.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then
switch on the machine power. If the same message is displayed again, contact
your local Fuji Xerox representative.
062-277
[Cause] A communication error occurred between the document scanning unit and the
document feeder.
[Remedy] Contact your local Fuji Xerox representative.
062-300
[Cause] The top cover and left cover of the document feeder is not completely closed.
[Remedy] Close the top cover and left cover of the document feeder. A staple, metal clip or
other foreign object may be stuck to the magnetic area of the top cover. Open the
top cover of the document feeder and check whether there are any foreign
objects. Remove any foreign objects and then close the top over and left cover.
Error Code Cause and Remedy
* If you cannot resolve an error despite following the instructions described in the table, contact your local Fuji Xerox
representative. The contact number is printed on the label or card attached on the machine.
To Next Page
Loading...
