Error Code
207
Problem Solving
7
062-311
062-330
062-345
062-357
062-360
062-362
062-371
062-380
062-386
062-393
062-395
062-396
062-397
062-398
[Cause] An error occurred.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then
switch on the machine power. If the same message is displayed again, contact
your local Fuji Xerox representative.
062-328
062-329
[Cause] An error occurred.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then
switch on the machine power. If the error is not resolved, contact your local Fuji
Xerox representative.
062-399
[Cause] An error occurred.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then
switch on the machine power. If the error is not resolved, contact your local Fuji
Xerox representative.
062-500
[Cause] An error occurred.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then
switch on the machine power. If the error is not resolved, contact your local Fuji
Xerox representative.
062-790
[Cause] Copying of the scanned document is prohibited.
[Remedy] Refer to "1 Before Using the Machine" > "Legal Notice" in the User Guide.
063-210
[Cause] An error occurred in the document feeder.
[Remedy] Contact your local Fuji Xerox representative.
063-500
[Cause] An error occurred in the document feeder.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then
switch on the machine power. If the error is not resolved, contact your local Fuji
Xerox representative.
065-210
[Cause] An error occurred in the document feeder.
[Remedy] Contact your local Fuji Xerox representative.
065-211
065-222
065-223
065-224
065-225
[Cause] An error occurred in the document feeder.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then
switch on the machine power. If the error is not resolved, contact your local Fuji
Xerox representative.
071-210
[Cause] Tray 1 malfunction
[Remedy] Confirm the paper loading condition for the Tray, and then switch off the machine
power, make sure that the touch screen is blank, and then switch on the machine
power. If the error still is not resolved, contact your local Fuji Xerox
representative. You can use a tray other than Tray 1.
Error Code Cause and Remedy
* If you cannot resolve an error despite following the instructions described in the table, contact your local Fuji Xerox
representative. The contact number is printed on the label or card attached on the machine.
To Next Page
Loading...
