Fuji Xerox Color 550

7 Problem Solving
208
Problem Solving
7
071-211
[Cause] Tray 1 malfunctioned
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then
switch on the machine power. If the error is not resolved, contact your local Fuji
Xerox representative.
072-210
[Cause] Tray 2 malfunction
[Remedy] Confirm the paper loading condition for the Tray, and then switch off the machine
power, make sure that the touch screen is blank, and then switch on the machine
power. If the error still is not resolved, contact your local Fuji Xerox
representative. You can use a tray other than Tray 2.
072-211
[Cause] Tray 2 malfunctioned
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then
switch on the machine power. If the error is not resolved, contact your local Fuji
Xerox representative.
073-210
[Cause] Tray 3 malfunction
[Remedy] Confirm the paper loading condition for the Tray, and then switch off the machine
power, make sure that the touch screen is blank, and then switch on the machine
power. If the error still is not resolved, contact your local Fuji Xerox
representative. You can use a tray other than Tray 3.
073-211
[Cause] Tray 3 malfunctioned
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then
switch on the machine power. If the error is not resolved, contact your local Fuji
Xerox representative.
074-210
[Cause] Tray 4 malfunction
[Remedy] Confirm the paper loading condition for the Tray, and then switch off the machine
power, make sure that the touch screen is blank, and then switch on the machine
power. If the error still is not resolved, contact your local Fuji Xerox
representative. You can use a tray other than Tray 4.
074-211
[Cause] Tray 4 malfunctioned
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then
switch on the machine power. If the error is not resolved, contact your local Fuji
Xerox representative.
075-210
075-211
[Cause] Tray 5 malfunction
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then
switch on the machine power. If the error is not resolved, contact your local Fuji
Xerox representative.
077-312
[Cause] An error occurred
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then
switch on the machine power. If the error is not resolved, contact your local Fuji
Xerox representative.
077-320
[Cause] An error occurred.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then
switch on the machine power. If the same message is displayed again, contact
your local Fuji Xerox representative.
077-909
[Cause] Jammed paper remains.
[Remedy] Follow the instructions on the touch screen and remove the remaining jammed
paper.
078-250
[Cause] An error occurred in Tray 6 (HCF).
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then
switch on the machine power. If the error still is not resolved, contact your local
Fuji Xerox representative.
Error Code Cause and Remedy
* If you cannot resolve an error despite following the instructions described in the table, contact your local Fuji Xerox
representative. The contact number is printed on the label or card attached on the machine.