Fuji Xerox Color 550

7 Problem Solving
236
Problem Solving
7
2 Pull lever 1a to the right.
3 Remove the jammed paper.
Note • If the paper is torn, make sure no piece of
paper remains inside the machine.
4 If the jammed paper cannot be removed in
Step 3, return lever 1a to its original position
(1), and pull lever 1b to the right (2).
5 Gently pull out the jammed paper.
Note • If the paper is torn, make sure no piece of
paper remains inside the machine.
6 Return lever 1b to its original position.
7 Close the front cover of the finisher.
Note • A message will be displayed and the machine will not operate if the front cover of the finisher
is even slightly open.
Paper Jams at Lever 2a
1 If you can see the edge of the jammed paper
on the output tray, gently pull out the paper
from the exit area.