Paper Jams
237
Problem Solving
7
2 Open the front cover of the finisher.
3 Pull lever 2a to the right.
4 Remove the jammed paper.
Note • If the paper is torn, make sure no piece of
paper remains inside the machine.
5 Return lever 2a to its original position.
6 Close the front cover of the finisher.
Note • A message will be displayed and the machine will not operate if the front cover of the finisher
is even slightly open.
Paper Jams at Lever 2a (Using Knob 2c)
1 If you can see the edge of the jammed paper
on the output tray, gently pull out the paper
from the exit area.
2 Open the front cover of the finisher.