8 Appendix
276
Appendix
8
Finisher C2 with Booklet Maker (Optional)
Space Requirement Width 2,024 x Depth 804 mm (Main unit +
Finisher C2. When the bypass tray is extended
to the maximum.)
Type Output Tray Collate / Stack
Finisher Tray Collate / Stack (offset stacking available)
Booklet Tray Collate / Stack
Paper Size/
Paper Weight
Output Tray Maximum: 13 x 19", 12.6 x 19.2"
Minimum: Postcard (100 x 148)
64 - 300 gsm
Finisher Tray Maximum: 13 x 19", 12.6 x 19.2"
Minimum: B5
64 - 220 gsm
Booklet Tray Maximum: A3, 11 x 17"
Minimum: A4, 8.5 x 11"
64 - 220 gsm
Stacker
Capacity
Important
•When using 80
gsm paper.
Output Tray 500 sheets (A4)
Finisher Tray
(not stapled)
A4: 3,000 sheets
B4 or larger: 1,500 sheets
Mixed stack*: 300 sheets
*: Larger size paper is stacked on top of smaller size
paper.
Finisher Tray
(stapled)
A4: 200 sets or 1,500 sheets
B4 or larger: 100 sets or 1,500 sheets
Booklet Tray 20 sets
Note • Some Papers may not be placed into tray
depending on the Paper type.
Staple
Important
•When using 80
gsm paper.
Capacity 50 sheets (90 gsm or less, Uncoated)
7 sheets (106 to 176 gsm, Coated)
Note • Depending on the type of paper that is
being stapled, the stapled nails may be
bent.
Paper Size Maximum: A3, 11 x 17"
Minimum: B5
Position 1 place: Front/back, angled stapling
2 places: Parallel stapling
Punch Paper Size Maximum: 11 x 17"
Minimum: B5
Number of Holes 2 or 4,
3 (optional)
Paper Weight 64 - 200 gsm
To Next Page
Loading...
