Specifications
277
Appendix
8
Finisher D4 (Optional)
Booklet
Finishing
Important
•When using 80
gsm paper.
Capacity Center binding: 15 sheets*
Center folding: 5 sheets
*: 14 sheets when attaching a cover. The maximum
number of sheets can be changed by the customer
engineer.
Paper Size Maximum: 13 x 18"
Minimum: A4, 8.5 x 11"
Paper Weight Center binding: 64 to 220 gsm*
Center folding: 64 to 220 gsm*
Single folding: 64 to 220 gsm
*: Up to 220 gsm paper can be used for cover sheets.
When 91 to 220 gsm paper is used for a cover,
paper that can be used for body contents becomes
64 to 80 gsm.
Dimensions Width 921 x Depth 650 x Height 1,010 mm
Weight 86 kg
Space Requirement Width 2,092 x Depth 804 mm (Main unit +
Finisher C2 with Booklet Maker. When the bypass
tray is extend to the maximum.)
Type Output Tray Collate / Stack
Finisher Tray Collate / Stack (offset stacking available)
Paper Size/
Paper Weight
Output Tray Maximum: 13 x 19", 12.6 x 19.2"
Minimum: Postcard (100 x 148 mm)
64 - 300 gsm
Finisher Tray Maximum: 13 x 19", 12.6 x 19.2"
Minimum: B5
64 - 300 gsm
Stacker
Capacity
Important
•When using 80
gsm paper.
Output Tray 500 sheets
Finisher Tray
(not stapled)
A4 : 3,000 sheets
B4 or larger: 1,500 sheets
Mix stack: 350 sheets*
*: When larger size papers are loaded on smaller size
papers.
Finisher Tray
(stapled)
A4 : 200 sets or 3,000 sheets
B4 or larger: 100 sets or 1,500 sheets
Staple Capacity 100 sheets (64 - 300 gsm)
Note • When using paper over A4, or 8.5 x 11",
maximum stapled sheets is 65 sheets.
• Depending on the type of paper that is
being stapled, the stapled nails may be
bent.
Paper Size Maximum: A3, 11 x 17"
Minimum: B5
Position <1 place>
Front: Angled stapling
Center: Parallel stapling
Rear: Parallel stapling
<2 places>
Parallel stapling*
*: The supported paper orientation for A4-size paper
is .
To Next Page
Loading...
